Bresser T-Adapter SCT

BRESSER T-Adapter SCT

Set of 5 extensions with T2 threads on both sides for astrophotography. Also equipped with an SC to T2 thread adapter.

In a nutshell

• This adapter is the basis for focal recordings with a Schmidt-Cassegrain or Advance Coma Free telescope.
  
  
• The adapter is directly screwed onto the rear side of the tube, followed by a T2 ring (available for many cameras). This way, the camera is securely held to the telescope's optics and acts in turn as an objective.
  
  
• If the CCD SC/T2 adapter is used in connection with a focal length reduction lens, the distance to the camera can be optimally adjusted with different lengths. Each length has a corresponding T2 thread.
  
  
• The following lengths are included: 5 mm / 7.5 mm / 10 mm / 15 mm / 30 mm / The adapter itself offers a height of 7.5 mm.
  
  
• Delivery: camera adapter.

In astrophotography, most cameras are connected to a telescope via a T2 thread (M42x0.75), the most widely used international standard. However, in many cases, T2 adapters and T2 rings to connect telescope focal lengths to a camera are not sufficient, as specific distances must also be maintained.

This is particularly important when using correctors, reducers, or flatteners. This set of extension tubes, consisting of tubes of 5 mm, 7.5 mm, 10 mm, 15 mm, and 30 mm, will allow you to achieve almost any distance using the corresponding combination. Each tube has a T2 inner thread on one side and a T2 outer thread on the other side.

PROPERTIES

• 5 T2 tubes with lengths from 5 mm to 30 mm
• The combination of the tubes allows distances from 5 mm to 67.5 mm
• SCT adapter and T2 thread